manualshive.com logo in svg

Mitsubishi Electric MELSEC System Q, Special Instructions Manual

The Mitsubishi Electric MELSEC System Q offers advanced automation solutions. Enhance your understanding of its features, setup, and programming with the comprehensive User Manual available for free download from our website. Unlock its full potential and optimize your operations with this essential resource at your fingertips.

Share
Download
background image

1  OVERVIEW

1.3  Modules and Versions Applicable to Instructions

13

1

1.3

Modules and Versions Applicable to Instructions

This section describes the modules and versions applicable to the instructions explained in this manual. For details of 
applicable versions, refer to each instruction in Chapter 5

Function/module for explaining an instruction

Applicable version/serial 
number

Analog module

Q64AD, Q68ADV, Q68ADI, Q64AD-GH, Q62AD-DGH, Q68AD-G, 
Q66AD-DG, Q64ADH, Q64DAH, Q62DAN, Q64DAN, Q68DAVN, 
Q68DAIN, Q62DA, Q64DA, Q68DAV, Q68DAI, Q62DA-FG, Q66DA-G, 
Q64RD, Q64RD-G, Q64TD, Q64TDV-GH, Q68TD-G-H01, Q68TD-G-
H02, Q68RD3-G, Q61LD, Q68CT, L60AD4, L60AD4-2GH, L60DA4, 
L60AD2DA2, L60ADVL8, L60ADIL8, L60DAVL8, L60DAIL8

Applicable to all versions

Positioning module

QD75P1N, QD75P2N, QD75P4N, QD75D1N, QD75D2N, QD75D4N, 
QD75P1, QD75P2, QD75P4, QD75D1, QD75D2, QD75D4, QD75M1, 
QD75M2, QD75M4, QD75MH1, QD75MH2, QD75MH4, LD75P1, 
LD75P2, LD75P4, LD75D1, LD75D2, LD75D4

Applicable to all versions

Serial communication module

QJ71C24N, QJ71C24N-R2, QJ71C24N-R4, QJ71C24, QJ71C24-R2, 
LJ71C24, LJ71C24-R2

The modules that can use the 
UINI instruction are limited.

Page 89 Mode switching

CC-Link system master/local module

QJ61BT11N, LJ61BT11

Applicable to all versions

QJ61BT11

The modules that can use the 
RLPASET instruction are limited.
The instruction is applicable to 
the module of which the function 
version is B and the first five 
digits of the serial number are 
'03042' or higher.

Page 118 Network 

parameter setting

CC-Link IE Controller Network module

QJ71GP21-SX, QJ71GP21S-SX

Applicable to all versions

CC-Link IE Field Network module

QJ71GF11-T2, LJ71GF11-T2

Applicable to all versions

MELSECNET/H network module

QJ71LP21, QJ71LP21-25, QJ71LP21S-25, QJ71LP21G, QJ71BR11, 
QJ72LP25-25, QJ72LP25G, QJ72BR15

Applicable to all versions

Ethernet interface module

QJ71E71-100, QJ71E71-B5, QJ71E71-B2, LJ71E71-100

Applicable to all versions

CPU module supporting the PID control 
instruction

Q00JCPU, Q00UJCPU, Q00CPU, Q00UCPU, Q01CPU, Q01UCPU, 
Q02CPU, Q02HCPU, Q02UCPU, Q03UDCPU, Q03UDVCPU, 
Q03UDECPU, Q04UDHCPU, Q04UDVCPU, Q04UDEHCPU, 
Q06HCPU, Q06UDHCPU, Q06UDVCPU, Q06UDEHCPU, 
Q10UDHCPU, Q10UDEHCPU, Q12HCPU, Q12PRHCPU, 
Q13UDHCPU, Q13UDVCPU, Q13UDEHCPU, Q20UDHCPU, 
Q20UDEHCPU, Q25HCPU, Q25PRHCPU, Q26UDHCPU, 
Q26UDVCPU, Q26UDEHCPU, Q50UDEHCPU, Q100UDEHCPU, 
L02SCPU, L02SCPU-P, L02CPU, L02CPU-P, L06CPU, L06CPU-P, 
L26CPU, L26CPU-P, L26CPU-BT, L26CPU-PBT

The modules that can use the 
instruction are limited.

Page 227 PID Control 

Instruction (Inexact 
Differential),Page 240 PID 
Control Instruction (Exact 
Differential)

Built-in Ethernet port QCPU, Built-in Ethernet 
port LCPU (Built-in Ethernet function)

Q03UDVCPU, Q03UDECPU, Q04UDVCPU, Q04UDEHCPU, 
Q06UDVCPU, Q06UDEHCPU, Q10UDEHCPU, Q13UDVCPU, 
Q13UDEHCPU, Q20UDEHCPU, Q26UDVCPU, Q26UDEHCPU, 
Q50UDEHCPU, Q100UDEHCPU, L02CPU, L02CPU-P, L06CPU, 
L06CPU-P, L26CPU, L26CPU-P, L26CPU-BT, L26CPU-PBT

The modules that can use the 
socket communication function 
instruction are limited when 
using the Built-in Ethernet port 
QCPU.
The instruction is applicable to 
the module of which the function 
version is B and the first five 
digits of the serial number are 
'11012' or higher.
The instruction is applicable to 
all versions when using the Built-
in Ethernet port LCPU.

LCPU (Built-in I/O function)

L02SCPU, L02SCPU-P, L02CPU, L02CPU-P, L06CPU, L06CPU-P, 
L26CPU, L26CPU-P, L26CPU-BT, L26CPU-PBT

Applicable to all versions

Data logging function

Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, 
Q26UDVCPU, L02CPU, L02CPU-P, L06CPU, L06CPU-P, L26CPU, 
L26CPU-P, L26CPU-BT, L26CPU-PBT

Applicable to all versions

Summary of Contents for MELSEC System Q





























































































































































































































































































































Reviews:

No comments

Related manuals for MELSEC System Q

Aalborg DPC Operating Manual preview
DPC
Brand: Aalborg Pages: 128
DAVIS 6830 User Manual preview
6830
Brand: DAVIS Pages: 8
Ebyte E70 Series User Manual preview
E70 Series
Brand: Ebyte Pages: 34
XVision XD200 User Manual preview
XD200
Brand: XVision Pages: 28
YASKAWA CC-Link Installation Manual preview
CC-Link
Brand: YASKAWA Pages: 61
Value Point 3500 Quick Start Manual preview
3500
Brand: Value Point Pages: 7
Samson 3430 Operating Instructions Manual preview
3430
Brand: Samson Pages: 52
Samson 3275 Mounting And Operating Instructions preview
3275
Brand: Samson Pages: 32
Danfoss Cascade Operating Instructions Manual preview
Cascade
Brand: Danfoss Pages: 59
Daikin BRC1H71W Installation Manual preview
BRC1H71W
Brand: Daikin Pages: 38
Daikin BRC1H71W Operation Handbook preview
BRC1H71W
Brand: Daikin Pages: 2
Daikin BRC1E72 Operation Manual preview
BRC1E72
Brand: Daikin Pages: 148
Daikin EHVH04S18CA Operation Manual preview
EHVH04S18CA
Brand: Daikin Pages: 12
Daktronics RC-100 Operation Manual preview
RC-100
Brand: Daktronics Pages: 52
Waeco RC-100 Installation And Operating Instructions Manual preview
RC-100
Brand: Waeco Pages: 20
Z-Wave RC-100 Operating Instructions Manual preview
RC-100
Brand: Z-Wave Pages: 56
H3C WX Series Configuration Manual preview
WX Series
Brand: H3C Pages: 69
SYR 315.2 Instructions For Use preview
315.2
Brand: SYR Pages: 2

Brands by name

Popular brands

Load more brands