Mitsubishi Electric MELSEC System Q, Special Instructions Manual

Page: 153 / 316

5 MODULE DEDICATED INSTRUCTION
5.4 Network Dedicated Instruction
151
5
Setting data
Device Item Setting data Setting
range Setting side
(s)[0] Execution/error
completion type
Error completion type (bit 7)
Specify the clock data setup status at the time of error completion.
0: Clock data at the time of error completion is not set in the area starting from (s)[11].
1: Clock data at the time of error completion is set in the area starting from (s)[11].
0000H, 0080H User
(s)[1] Completion
status The instruction completion status is stored.
0: Normal completion
Other than 0: Error completion (error code)

System
(s)[2] Host station
channel Specify the channel of host station that stores receive data.
Setting values are as follows.
• Ethernet, MELSECNET/H, CC-Link IE Controller Network: 1 to 8
• CC-Link IE Field Network: 1 to 2
1 to 8 User
(s)[3] Channel used
by sending
station Channel used by the sending station is stored.
1 to 8: Channel

System
(s)[4] Network No. of
sending station Network number of the sending station is stored.
1 to 239: Network number  System
(s)[5] Sending station
No. Station number of the sending station is stored.
Stored values are as follows.
• MELSECNET/H: 1 to 64
• Ethernet, CC-Link IE Controller Network: 1 to 120
• Master station in CC-Link IE Field Network: 125 (7DH)
• Local station or the intelligent device station in CC-Link IE Field Network: 1 to 120

System
(s)[6] (Reserved)
  
(s)[7] (Reserved)
  
(s)[8] Arrival
monitoring time Specify the monitoring time required for the instruction completion. When the
instruction is not completed within the monitoring time, it completes abnormally.
Setting values are as follows.
■ Ethernet
• 0 to 16383
• 0 to TCP retransmission timer value: Monitoring is performed by the TCP
retransmission timer value.
• (TCP retransmission timer value + 1) to 16383: Monitoring time (unit: second)
■ CC-Link IE MELSECNET/H
• 0 to 32767
• 0: 10 seconds
• 1 to 32767: 1 to 32767 seconds
0 to 32767 User
(s)[9] Receive data
length The number of received data stored in (d1) to (d1)+n is stored.
0: No receive data
1 to 960: Number of words of receive data

System
(s)[10] (Reserved)
  
(s)[11] Clock set flag
*1
Valid/invalid status of the data in the area starting from (s)[12] is stored.
0: Invalid
1: Valid  System
(s)[12]

(s)[15]
Clock data at
the time of error
completion
*1
Clock data at the time of error completion are stored in BCD format.  System
(s)[16] Error-detected
network No.
*1
Network number of the station where an error was detected is stored. (However,
when an error was detected at the host station, the network number is not stored.)
1 to 239: Network number

System
b15
0 0 (1)
b7 b0
… …
b15 b8 b7 to b0 to
s
s
s
s
Month (01
H
to 12
H
)
Hour (00
H
to 23
H
)
Second (00
H
to 59
H
)
Year (00
H
to 99
H
) First two digits
Year (00
H
to 99
H
) Last two digits
Day (01
H
to 31
H
)
Minute (00
H
to 59
H
)
Day of week (00
H
to 06
H
)
00
H
(Sun.) to 06
H
(Sat.)
[12 ]
[13 ]
[14 ]
[15 ]