46
These signals are set in the initial values. Using
Pr. 180 to Pr. 189
, you can change input signal functions.
Refer to the Instruction Manual (Detailed) of the inverter for details of
Pr. 180 to Pr. 189
.
For the FR-F800 series, no function is assigned in the initial setting.
The signals are fixed. They cannot be changed using parameters.
These signals are set in the initial values. Using
Pr. 190 to Pr. 196
, you can change output signal functions.
Refer to the Instruction Manual (Detailed) of the inverter for details of
Pr. 190 to Pr. 196
.
Output signal can be assigned using
Pr. 313 to Pr. 315
.
The settings of
Pr.313 to Pr.315
are the same as those of
Pr.190 to Pr.196 (output terminal function selection)
.
Refer to the Instruction Manual (Detailed) of the inverter for details of
Pr. 190 to Pr. 196
.
"n" indicates a value determined according to the station number setting.
The signal is valid only for the FR-A800 series.
RY(n+3)B to
RY(n+3)F
Reserved
—
RX(n+3)B
Remote station ready
RX(n+3)C
to
RX(n+3)F
Reserved
—
Device
No.
Signal
Refer
to
page
Device
No.
Signal
Refer
to
page
