46
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
<TIMER PROGRAM SETTINGS> (continued)
■
HOLIDAY SETTING
This menu is used to set holidays throughout the year.
<HOLIDAY SETTING>
--
/-- --/-- --/-- --/--
--/-- --/-- --/-- --/--
--/-- --/-- --/-- --/--
--/-- --/-- --/-- --/--
--/-- --/-- --/-- --/--
DAY/MONTH
1. Press the SET UP button
}
<SETTINGS>
}
Select
“HOLIDAY SETTING” in the <TIMER PROGRAM SETTINGS>
screen and determine desired holidays.
2. Press the CLEAR button or the SET UP button.
When setting a holiday in “HOLIDAY SETTING”
and select “HOL” in the day of the week settings, the
program selected with “HOL” is given priority over
the other programs.
■
Recording mode settings A to D for normal
recording and alarm recording
The recording camera, recording intervals, and recording
picture quality for normal recording/alarm recording can be
set to 4 patterns of recording mode, A to D (
see pages
25 and 26 for “Setting the recording interval and recording
picture quality for normal recording,” pages 41 to 43 for
“Recording mode settings for normal recording and alarm
recording”).
1. Press the SET UP button
}
<SETTINGS>
}
Select “REC
MODE A” in the <TIMER PROGRAM SETTINGS> screen and
then press the ENTER button.
• The <REC MODE A> screen appears.
<REC MODE A>
>>ALARM SETTING
RECORD SETTING
2. Press the JOG , buttons to select either “ALARM
SETTING” or “RECORD SETTING” and determine such
setting.
•
see page 41 for “ALARM SETTING,” page 42 for
“RECORD SETTING,” page 43 for “PRE ALARM REC.”
When you set “SHORT,” “MEDIUM,” or “LONG”
in the PRE ALARM REC, normal recording cannot
be performed. Set the PRE ALARM REC to “OFF”
to perform normal recording or alarm recording.
When you set “A-PPS” in the <RECORD
SETTING> screen to “- - - - - -” for all the cameras,
pre-alarm recording is not performed even if PRE
ALARM REC is set to “SHORT,” “MEDIUM,” or
“LONG.” In this case, normal recording is performed
at the interval which is set in “PPS.”
3. To continue with REC MODE B to REC MODE D, repeat
steps 1 and 2.
The storage area in MAIN HDD set in “PARTI-
TION” is displayed with the percentage (%) and the
recordable time of that storage area is displayed in
<ESTD REC> (for PARTITION,
see page 72).
■
ALARM REC DURATION
The recording time period for alarm recording can be set
(for ALARM REC DURATION,
see page 43).
♦
Overlapped timer program settings
When the programmed period of timer program settings
are overlapped, the unit gives priority to the higher-
numbered program.
Example 1
• Program 1 is set for 14:00 to 17:00 with the PPS of 5P.
• Program 2 is set for 15:00 to 16:00 with the PPS of 1P.
Under this condition, the unit will give priority to Program 2 for
the duration of the overlapping period, from 15:00 to 16:00.
The unit will operate as shown in the chart below.
14:00
15:00
16:00
17:00
14:00
15:00
16:00
17:00
Example 1)
In Program 1, recording is set for PPS
to 5P, from 14:00 to 17:00.
1P
In Program 2, recording is set for PPS
to 1P, from 15:00 to 16:00.
Actual recorded contents
5P
5P
Program 2
5P
1P
Program 1
Program 1
Example 2
• Program 1 is set for 14:00 to 17:00 with the PPS of 5P.
• Program 2 is set for 15:00 to 16:00 with the SKIP setting.
Again, the unit will give priority to Program 2 for the duration
of the overlapping period. As shown in the illustration below,
the unit will activate the Skip setting from 15:00 to 16:00.
14:00
15:00
16:00
17:00
14:00
15:00
16:00
17:00
5P
5P
NO
RECORDING!
Example 2)
SKIP
In Program 2, the SKIP setting is
entered for 15:00 to 16:00.
5P
Actual recorded contents
Program 2
Program 1
Program 1
In Program 1, recording is set for PPS
to 5P, from 14:00 to 17:00.
