4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
43
(2) Click the [Settings] tab, and then click the [Memory Clear] button.
(3) A confirmation message whether to execute memory clear is displayed.
Click the [Yes] button.
Operation: The mouse cursor changes to an hourglass, and the NC Card memory is cleared. It
takes approximately 1 minute to clear the memory. When the memory clear has
finished, the “Memory clear complete!” message is displayed.
(4) Close all the open windows.
4.3.1.5 Confirming NC Card Operation
Confirm the installed Device Driver operating normally according to the procedures below.
Confirm the display status of the 7-segment LED on NC Card.
[Procedure]
(1) NC Card is working normally if the 7-segment LED on the NC Card is blinking.
Proceed to chapter 4.4.
Downloaded from