2. Introduction
2.2 System Requirements
3
2.2 System Requirements
Table 2.1 System Requirements
PCI NC Card
ISA NC Card
Pointing device
PCI bus (PCI bus standard 2.0
or more)
ISA bus
Card size: 90 x 175 mm
Card size: 100 x 249 mm
+3V (0.2A or more) supply needed
-
Windows95
-
Windows98
-
Windows98 Second Edition
WindowsNT4.0
-
Windows2000
-
WindowsXP
-
Applicable OS, and recommended CPU/clock and memory
CPU/clock
Memory
Windows95 OSR2
Pentium/100 MHz or more Pentium
/150 MHz or more recommended
16 MB or more 24 MB
or more recommended
Windows98
Pentium/200 MHz or more Pentium
/233 MHz or more recommended
16 MB or more 24 MB
or more recommended
Windows98 Second
Edition
Pentium/200 MHz or more Pentium
/233 MHz or more recommended
24 MB or more 32 MB
or more recommended
Windows NT4.0
Workstation (SP3 or later)
Pentium/200 MHz or more Pentium
/233 MHz or more recommended
24 MB or more 32 MB
or more recommended
Windows2000
Pentium/300 MHz or more
64 MB or more 128 MB
or more recommended
WindowsXP
Pentium/300 MHz or more
128 MB or more
Applicable OS
Applicable OS
+5V (2.5A or more)
+12V (0.5A or more)
Drooping characteristic of internal power
supply when PC is turned off
It must take 1 ms or more for +5V voltage to drop from
+4.5V to +4.0V.
Expansion slot
Floppy disk drive unit
One or more floppy disk drive of 3.5 in. and 1.44 MB
A mouse or its compatible pointing device
Display device
Display device with a resolution of 640x480 dots or more
and 256 colors or more
Memory
Depends on the OS used (Refer to the table below).
Hard disk capacity
A free space of 20 MB or more
Applicable PC
IBM PC/AT or its compatible computer
CPU/clock
Depends on the OS used (Refer to the table below).
Note: The recommended values above are standards and do not guarantee the comfortable operation of
the software you add.
Downloaded from
