4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
16
4.2.1.3 Installing NC System Device Driver (2)
Installation of the device driver is continued automatically.
[Procedures]
(1) Check the connection of NC Card, and then turn on the personal computer.
Operation: The following message appears on the lower right corner of the screen, and then the
“Found New Hardware” wizard is opened.
Display sample for WindowsXP
Display sample for Windows2000
* This message disappears after a period of time.
(2) Click [Next >].
* In some cases, it takes several minutes for this screen to appear.
For Windows2000, uncheck all
the boxes under "Optional
search locations" and click
[Next>].
* This screen does not exist
for WindowsXP.
Downloaded from
