Mitel 5324 User Reference Manual Download Page 98 | Manualshive

Page: 98 / 130

background image

Mitel IP Phone User Reference Guide Release 4.1

96

Connect and configure the headset

To connect the headset to the Mitel 5340, 5224/5324 or 5212/5312 IP phone,
follow these steps:

1. Plug the headset into the headset jack on the back of the set.

2. Remove the handset from the cradle. You can hook it over the top of the set

cradle.

3. If using a Mitel 5340 or 5224/5324 IP phone, press the

DIR

softkey, then the

QUIT

softkey to take the phone to an on-hook (or idle) state.

If using a Mitel 5212/5312 IP phone, press the

key, then press the

key to take the phone to an onhook (or idle) state.

Answer a Call with the headset

To answer a call while using the headset, press the

Line Appearance

key or the

ANSWER

softkey.

End a Call with the headset

To end a call while using the headset on the Mitel 5224/5324 or 5340 IP phone,
press the

END

softkey

To end a call while using the headset on the Mitel 5212/5312 IP phone, press the

key.

Mute the headset

To mute the microphone, press and hold the control switch if it has one.

Make a call with the headset

To make a call while using the headset, press a Line Appearance key and dial
the number. line. You can also use dial, directory dial, and speed dial features.
See the section for making a call for your phone model in this guide.

Switch to the handset

To divert the operation back to the handset, the user can either

•

Disconnect the headset from the phones jack or

•

Use an external headset adapter box which has a dedicated
headset/handset switch.

Using a Programmable Key Module

A Programmable Key Module (PKM) provides additional memory keys to those
provided on your phone. The system supports the Mitel 5412 PKM which
provides an extra 12 additional memory keys and the Mitel 5448 PKM which
provides an additional 48 memory keys. If required you can have up to two 5448
PKM units on one phone.

The PKMs can be attached to Mitel 5224 or 5324 IP phones.

«
...
96
97
98
99
100
...
»

Summary of Contents for 5324



































































































































Reviews:

No comments

Related manuals for 5324

Brand: JBL Pages: 16

Authentics L 16

Brand: JBL Pages: 17

Brand: TANDBERG Pages: 2

6000 MXP Profile

Brand: TANDBERG Pages: 2

3000 MXP Profile

Brand: TANDBERG Pages: 2

Brand: TANDBERG Pages: 11

Media Processing System MPS 800

Brand: TANDBERG Pages: 106

Brand: TANDBERG Pages: 44

Brand: TANDBERG Pages: 2

Brand: TANDBERG Pages: 11

Brand: WAREMA Pages: 112

Brand: Telefunken Pages: 41

Brand: American Panel Pages: 18

Aureon 7.1 FireWire

Brand: TerraTec Pages: 2

eyespeak zuvo 12-D

Brand: Talk To Me Technologies Pages: 28

Scopia XT5000 Series

Brand: RADVision Pages: 55

Brand: Shure Pages: 18

Alltech 3300 ELSD

Brand: DataApex Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands