24
5.
Additional Settings
5.6
Cleaning Mode
The Cleaning-Mode enables the user to temporarily deactivate the sensors on the
faucet for 2 minutes.
Once activated with the miscea remote control, the user simply needs to
simultaneously activate the soap and disinfectant sectors for 3 seconds or until a beep
tone is heard. The bars on the display will animate to indicate the sensors on the faucet
are temporarily deactivated to enable easy cleaning of the faucet without accidentally
activating any of the sensors.
After 2 minutes, the system will automatically exit the cleaning mode. To manually exit
the Cleaning-Mode, place hand over the soap and disinfectant sectors at the same time
for 3 seconds.
Press the buttons indicated in the following order: «SPOOL» button, «LIGHT» button,
«LANG» button. With the «+» and «-» buttons, the cleaning mode can be enabled and
disabled. To save settings, press the «SAVE» button. All colored LED lights illuminate
to indicate the new setting has been saved. If the «SAVE» button is not pressed within
10 seconds of the last selection, the previously saved setting will be stored.
SPOOL
LIGHT
LANG
miscea CLASSIC
Hold for
3 seconds
Hold for
3 seconds
Sensors disabled
for 2 minutes
Sensors disabled
for 2 minutes
miscea KITCHEN
Position
1
2
3
4
5
6
7
8
9
Bar position
Cleaning mode
OFF
ON
CLASSIC (v.1.56+)
Ä
KITCHEN (v.1.58+)
Ä
This function is available with faucet software version starting from version number indicated next to each model.
