V 20.01
19
English
4.
Public Mode
4.1
Enable / Disable the Public Mode
miscea LIGHT Model
Press the buttons indicated in the following order:
«LIQUID 2» button,
Enable
: «+» button /
Disable
: «-» button,
«SAVE» button.
miscea CLASSIC Pure S Model
Press the buttons indicated in the following order:
«LIGHT», «LIQUID 2», «LANG» buttons,
Enable
: «+» button /
Disable
: «-» button,
«SAVE» button.
Position
1
2
3
4
5
6
7
8
9
Bar position
Min
Max
Enable / Disable
OFF
ON
CLASSIC Pure S (v.1.63+)
Ä
LIGHT (v.1.22+)
Ä
First water cycle delay time
in seconds
0
0.5
1
1.5
2
2.5
3
3.5
4
CLASSIC Pure S (v.1.63+)
Ä
LIGHT (v.1.22+)
Ä
These functions are available with faucet software version starting from version number indicated next to each model.
4.2
Change the short water cycle delay time
The short water cycle delay time refers to the waiting state the faucet is in after the soap has been
dispensed, to give the user an opportunity to lather soap on their hands without the water flushing the
soap away immediately. Refer to letter A in Fig. G.
The water sector will light up. With the «+» and «-» buttons, the delay time can be changed. To save
settings, press «SAVE» button. All colored LED lights illuminate to indicate the new setting has been
saved. If the «SAVE» button is not pressed within 10 seconds of the last selection, the previously saved
setting will be stored.
miscea LIGHT Model
With the Public Mode enabled, press «MEMO»
button on the remote control.
miscea CLASSIC Pure S Model
With the Public Mode enabled, press the buttons
indicated in the following order:
MEMO
BUCKET
LANG
LIGHT
LIQUID 2
LIGHT
LANG
SAVE
LIQUID 2
SAVE
