20
4.
Public Mode
4.3
Change the duration of water flow in short water cycle
The short water cycle is intended to make obvious to the user that the water sector is now activated and
allows the user to wet their hands. During the short water cycle, the water sector will light up, and a small
amount of water will be automatically dispensed for a specified amount of time. This water flow time can
be changed. Refer to nr. 2 in Fig. G.
The water sector will light up. With the «+» and «-» buttons, the water flow time can be changed. To
save settings, press «SAVE» button. If the «SAVE» button is not pressed within 10 seconds of the last
selection, the previously saved setting will be stored.
miscea LIGHT Model
With the Public Mode enabled, press the «TEMP»
button on the remote control.
miscea CLASSIC Pure S Model
With the Public Mode enabled, press the buttons
indicated in the following order:
TEMP
DELAY
LANG
LIGHT
4.4
Change duration system is in long water cycle
After the water flow in the short water cycle has stopped, the long water cycle begins. The light in the
water sector stays illuminated for the entire duration the long water cycle is active. The system will allow
the user to get water on demand and rinse their hands. Refer to nr. 3 in Fig. G. The duration of time the
system stays in the long water cycle can be changed with the remote control.
The water sector will light up. With the «+» and «-» buttons, the duration of time that the water sector
stays activated after the short water cycle has occurred can be changed. To save settings, press
«SAVE» button. If the «SAVE» button is not pressed within 10 seconds of the last selection, the previ-
ously saved setting will be stored.
miscea LIGHT Model
With the Public Mode enabled, press «BUCKET»
button on the remote control.
miscea CLASSIC Pure S Model
With the Public Mode enabled, press the buttons
indicated in the following order:
BUCKET
DURATION
LANG
LIGHT
Position
1
2
3
4
5
6
7
8
9
Bar position
Min
Max
Duration of first water cycle
in seconds
0
0.5
1.5
2.5
3.5
4.5
5.5
6.5
7.5
CLASSIC Pure S (v.1.63+)
Ä
LIGHT (v.1.22+)
Ä
Duration of second water cycle
in seconds
0
2
4
6
8
10
12
14
16
CLASSIC Pure S (v.1.63+)
Ä
LIGHT (v.1.22+)
Ä
These functions are available with faucet software version starting from version number indicated next to each model.
