Miscea AQUAMORE DUO, Instruction Manual, Page: 41 / 92

V 21.02
41
English
6. Cleaning and maintenance
6.4 Replacing the syrup pouch
Once the system does not dispense syrup concentrates anymore, the pouch needs to be replaced.
Refer to fig. J1-J4 for the correct installation of the pouches.
6.5 Priming the syrup tubes
After the installation of the syrup pouches, the tubes need to be primed. When the procedure has been
completed, the tubes are free of air and the system is ready for use.
• Press the LED switch on the Waterbox for 1 second. The LED starts blinking.
• To prime the syrup tube 1: Activate sector 4, then sector 3. Activate sector 5 to stop.
• To prime the syrup tube 2: Activate sector 5, then sector 2. Activate sector 4 to stop.
• Press the LED switch on the Waterbox for 1 second to exit priming mode.
6.6 Replacing the filter
Please use suitable filters from miscea aqualibur depending on the desired water quality. Change the
filters at the specified time intervals as well as after an inoperative period of one or more weeks.
We recommend the following filter from miscea aqualibur:
• Art. Nr. 95001 – aqualibur Water Filter
Please follow instructions for removing, installing the filter and priming the filter.
The water filter cartridge must be primed by flushing approx. 15 L of water through the filter
before being used for the first time. Do not activate the sparkling water sector when priming
the water filter. It is important this water does not enter the carbonation side of the system.