Miscea AQUAMORE DUO, Instruction Manual, Page: 26 / 92

26
3. Description
The miscea aquamore range of sensor faucets is a hygienic water dispensing system that enables you
to dispense freshly filtered, chilled, still, sparkling, and flavoured water without touching the system. The
faucet head has different sectors with built-in infrared sensors. The functions can be activated by moving
your hands in the detection zones of the sensors.
All models in the miscea aquamore range are equipped with innovative miscea aqualibur water hygiene
technology that proactively keeps the internal components of the system clean, hygienic, and minimizes
the risk of waterborne contaminations caused by stagnant water.
The following faucet model sizes are available (refer to fig. A)
1A. Standard model
1B. Large model
3.1 Components
Refer to fig. C for the identification of the components.
• Faucet (1A or 1B)
• miscea HyDrain (2)
• aqualibur Intelligent Filter Head (IFH) (3)
• aqualibur Filter Cartridge (4)
• Carbonator Unit (5)
• Waterbox (6)
• CO
2
Bottle (7)
• Syrupbox (18)
3.2 Identification of the product
Refer to fig. C for the location of the product type labels.
CAUTION
• The system should be installed and serviced by a technician certified according to DGUV
310-007 for Germany or similar standards of local norms enforced.
• Make sure all tubes for liquids are correctly connected.
• Do not cut or kink the tubes.
• Only use the supplied materials to install the system.
• Only use the power adapters supplied with the system, and ensure the correct adapter is
used with the correct component.
• Use only genuine replacement parts and accessories. The use of other parts will invalidate
the warranty, CE marking and may result in personal injury.
• Avoid damage from defective power supply cables. In the case of damage, the plug-in power
supply must be replaced by the manufacturer, his customer service or an equally qualified
person.
• The miscea aquamore systems are only suitable for indoor use.
• Do not install if the product (power cord) is live.
• Make sure the surface on which the system is installed is strong enough to support the
weight of the unit.
4. Installation