Miscea AQUAMORE DUO, Instruction Manual

Page: 29 / 92

V 21.02
29
English
• Refer to fig. F1-F2 for the installation of the faucet. Assemble the components in the given
order.
4.4 Installing the HyDrain
• Do not open the HyDrain or break the seal of the HyDrain. If you do, the warranty becomes
void.
• The HyDrain must be mounted vertically. Ensure the HyDrain is perfectly leveled using a spirit
level. Failure to do so will activate flooding sensors and inactivate the system.
• Placement of the HyDrain is important in relation to the drainage pipe – the angle of the tube
connecting HyDrain to drainage pipe should be horizontal or downward sloping so the water
can drain from the HyDrain and into the main drainage pipe.
• Refer to fig. G1-G6 for the installation of the HyDrain. Assemble the components in the given
order.
4.5 Installing the Waterbox
CAUTION
• Do not open the Waterbox or break the seal of the Waterbox. If you do, the warranty
becomes void.
• Do not connect the Waterbox of one set to the faucet of another set. There is a possibility that
the system does not function correctly.
• The enclosed plug-in power supply (plug type C) is only suitable for use with Schuko sockets
(CEE 7/4).
• Be careful with the power cables on the Waterbox. The connectors at the end of the cable are
fragile.
• Refer to fig. H1-H6 for the installation of the Waterbox. Assemble the components in the
given order.
4.6 Installing the Syrupbox
CAUTION
• Be careful with the electrical cable of the Syrupbox. The connector at the end of each cable
is fragile.
• Refer to fig. I1-J4 for installation of the Syrupbox. Assemble the components in the given
order.
4.7 Installing the Carbonator Unit
If the carbonator unit has been placed or turned upside down, wait at least 8 hours before
putting it into operation.
4. Installation