Miscea AQUAMORE DUO, Instruction Manual, Page: 38 / 92

38
LANG LIGHT MEMO
LIQUID 2
SA
VE
LIQUID 1
TEMP
DELAY
BU
CKET
DURA
TION
BEEP
DEFA
ULT
SPOOL
-
+
ma x
.
30 c m
30
º
Fig. M Fig. N
5.5 Using the remote control
With the remote control, you can change the default settings of the system. Settings include, but are not
limited to the following: dosage of syrup, hygienic flush cycle, light pulse, cleaning mode and resetting.
For further information and instructions, please visit the download page on our website or contact your
miscea representative. The remote control signal is detected through the display screen in the faucet
head. Position the remote control as shown in Fig. M and N below to operate. Then the desired settings
can be changed. For instructions on how to change specific settings using the remote control, please
refer to the miscea Remote Control instruction manual.
5. Use
CAUTION
• Do not try to repair the faucet, the Waterbox or the Syrupbox yourself. Only qualified miscea
personnel are permitted to make repairs. If you make repairs yourself, the warranty becomes
void.
• Do not clean the faucet with abrasives, strong acids or bleach products. If you do, the
warranty becomes void.
• When cleaning, do not spray the device or plug directly or indirectly with water.
WARNING
• Do not clean the system when it is switched on.
6.1 Storage
Store the system, filter, spare parts and any components of the system in a dry place, out of reach of
children.
6. Cleaning and maintenance