6.0 Module Settings
12
6.4 Relay Adder Module (Model RM-1008A)
P2
Data Cable to P5 of Main BPS-1100 Module or to previous Adder Module.
P1
Data Connector for next Adder Module.
P4
Power Connector to P6 of Main BPS-1100 Module or to previous Adder Module.
P3
Power Connector for next Adder Module.
JW1
Continuity Jumper removed if there are any more Adder Modules installed.
Jumper JW6 on the Main BPS-1100 Module must be removed if there are any Adder Modules installed.
There is one green LED per each relay (total of eight on each board), which illuminates steadily when the
corresponding relay is active.
Figure 8: Relay Adder Module