background image

 

23

 

 -

7.4 attaching the rope bag

As a final step you bring the rope bag 

between the two rope pairs above the 

cross of wood. Hang on the universal 

case with the two adjustable straps. For 

the motive bags (sun and sheep) you 

should made a knot in order to attach 

the cords. Then stow ropes and the 

possibly end of the rope of the foot part 

in this pocket.

saFeTy nOTice

The stowage of the ropes is for your safety. Due to the  fact that the ropes 

are in the bag, an accidental release of the height adjustment cannot occure.

assembly ot foot part (optional)

In this section we show you the installation and mounting of the foot part of your 

TRAUMSCHWINGER. Since you have to spread the netting in front of you, we 

recommend you put a blanket on the floor. Put the foot bundle in front of you and 

unwind the cord of the foot bundles. Then loosen the cotton bag with the timbers 

from the netting.

note

All´ the parts will be cleaned at the end of the production process. In addition  

we recommend that you manually clean certain parts to avoid contamination 

of cotton ropes. With a dry cotton cloth, clean the openings in the wooden 

poles to remove sanding dust residues.

Summary of Contents for TRAUMSCHWINGER Babyschwinger

































Reviews: