MIRAART TRAUMSCHWINGER Babyschwinger, Manual

Page: 21 / 32

-
21
-
7 netting hang up and span
In this section you will finished assembling your BABYSCHWINGER/ TRAUM -
SCHWINGER. For this you will need the height adjustment connected with the
netting, the vertical wood and the two side wood, the rope bag and a ladder.
7.1 netting to hang up with height adjustment
7.2 Querholz einsetzen
Hang the connected height adjustment with the
swivel into the prepared (resp. existing) suitable
attachment (see chapter 2 Prerequisites). The
following figure shows an example of a mounting
in a wooden beam.
safety note
Regardless of the type of mounting this has to be
regularly checked for tightness and wear!
One of the supplied wooden struts is longer than the
others. This is the vertical wood (conjunction) NOTE:
For models XXL and XXL extra large all wooden struts
are of same length. You will recognize the vertical strut
since it is thicker than the two of the other woods.
Take the vertical wood and run the respective rope
pair just above the connection knots in the recesses
of the vertical wood. Take care that the ropes, which
are running out of the bottom of the connection knots,
do not overlie one another or are twisted! Turn the
connecting knots in your hand so, that the two ropes
run freely to back and front (see the two Pictures on
the following page). Press the rope pair all the way
into the recess of the vertical wood (conjunction).