MIRAART TRAUMSCHWINGER Babyschwinger, Manual

Page: 16 / 32

-
16
-
5.8 attaching the second wooden
panel
5.9 screw down and tighten the
round nuts
Take the second wooden panel.
With a colored sticker marked side
of the wooden wedge must lie on
the second stainless steel inlay with
a color sticker. Grasp the second
wooden panel so, that the sticker
marked side facing downward. Run
the wooden panel on the threaded
rods and place it over the stainless
steel inlay. With colored sticker
marked side of the second wooden
panel is placed now on the colored
label marked side of the second
stainless steel inlay.
Now screw the three remaining
round nuts with the three threaded
rods, which are placed in the holes of
the second wooden panel. As tool you
can also use the Allen key from the
delivery. Finally drag every six round
nuts tightly. In front of you is now the
fully assembled height adjustment for
your BABYSCHWINGER/ KINDER -
SCHWINGER.
saFeTy nOTice
During use is a possibility that the round nuts loosen. Regularly check the
tightness of the round nuts and drag them firmly with the supplied Allen key.
In case the round nuts loosen, the space between the metal components
can cause metal abrasion, which possibly can stain cord.