MIRAART TRAUMSCHWINGER Babyschwinger, Manual

Page: 19 / 32

-
19
-
6.2 insert the rope ends and jam them
On delivery, the track ropes can be twisted in themselves and each other, because
of material and manufacturing conditions. Prior to inserting the rope ends in the
height adjustment, you need to make sure that the support ropes are not twisted in
itself and into each other.
saFeTy nOTice
In case the suspension ropes are inserted into the height adjustment twisted
in itself or into each other, this may increase the wear of the ropes through
damage to the rope surface.
Start at the left side to align the carrying ropes without twisting. Take the left
connecting knots into your left hand and lift this to the extent that the two ropes
are easily clammed to the corners of the netting. Turn the connecting knots in
your hand in a way that the two ropes from the connection knots avoid to over -
lie one another. (See the following two pix).
If the left connection knot is in this position, take the one from the knot
running rope pair between your thumb and forefinger of your right Hand
(see next figure).
righT wrOng