background image

 

26

 

 -

8.4 assemby of the foot part

Note

 

With foot height adjustment you change with few handles quite simply 

the height of the foot part. To let down the foot part, push the foot height 

adjustment upwards. For pulling up the foot part you push down the foot 

height adjustment. 

Usage of your  BaByschwinger/ Kinderschwinger

You will find in this section various information about usage and maintenance your 

 

BABYSCHWINGERs/ KINDERSCHWINGERs. 

saFeTy nOTice

 

If you notice damage of the material (e.g. cracks), the product may not 

be used anymore. When an infant or toddler is placed in the netting, a 

cloth must be placed underneath at least. Children´s are not allowed 

unsupervised use of the furniture. 

Place the loop behind the carabiner on the groove 

connection. If you have no height adjustment, put 

the loop of the foot part simply in your carabineer.

note

 

With the height adjustable footrest you can 

easily adjust the height with only a few gras

-

ps. In order to let the foot part down slide 

the height adjustable footrest upward. To lift 

up the foot part, slide the height adjustable 

footrest downward.

Summary of Contents for TRAUMSCHWINGER Babyschwinger

































Reviews: