-
12
-
5
assembly of the height adjustment
The first portion for mounting your TRAUMSCHWINGER (dream swing) forms
of assembling the supplied height adjustment. For this, you need the items from
the box of height adjustment and the swivel. The required tool (an Allen key) is
enclosed. The mounting of the height adjustment can most easily do, if you are
sitting at a table.
5.1 Prepare the threaded rods
Some metal parts are to check the
threaded pre-assembled. For the
assembly you must first all of them
disassemble. Take the three pre-
threaded rod´s unscrew each one
of the round nuts and remove the
respective stainless-steel socket
down of the threaded rod. The ring
nut, which remains on the threaded
rod, screw tightens. Now you have
three threaded rods, to each of which
a round nut screwed.
5.2 insertion of threaded rods (1)
Take now one of the triangular wooden
cheeks, which have one side a colored
sticker marks.
That is the inside of the cheek.
Hold it with one hand, and the side
with the sticker marked facing
downward. With your other hand stuck
through in each of the three holes a
threaded rod with a round nut.
Summary of Contents for TRAUMSCHWINGER Babyschwinger
Page 1: ...1 Your manual Babyschwinger Kinderschwinger...
Page 30: ...30 Enjoy...
Page 31: ...31 For your notes...