MIRAART TRAUMSCHWINGER Babyschwinger, Manual

Page: 18 / 32

-
18
-
6 connecting the netting with the height adjustment
Next you connect the netting of your BABYSCHWINGER/ KINDERSCHWINGER
with the height adjustment. Due to the fact that you have to spread the netting in
front of you, we recommend you put a blanket on the floor. The height adjustment
you should place next to you. This will help you with the next steps.
6.1 spread netting
Take the rolled netting and unroll it. Loosen the by knots fastened cloth bag with
the wooden crossbars as well as the two page woods off the netting. The cloth
bag may be put aside, since you need the timbers only in the next section. The
best way to spread the netting is, when you raise it once completely with your
hands. For this, take one of the two connection knots in each hand and lift the net
completely in to air. That netting will rotate itself into the correct position. You just
need to return it flat on the floor in this position.
For the next steps you need to make sure that the netting is aligned rightly on
the ground. This is indicated by the position of the Netting attached labels.
When the label is on the right top side of aligned netting in front of you, then it
lies in the proper position. If the label is not in this position, rotate or apply the
netting accordingly.