background image

 

28

 

 -

9.3 washing instructions
Prepare: 

First, remove the lateral and side struts and take out the TRAUMSCHWINGER. Loose 

the netting of the height adjustment. Spread the netting and lay the track ropes curled 

up on the netting. Fold the netting so that the support ropes completely enclosed with 

the netting. Put this net bundle into the washing drum. Please note, depending on the 

size of a washing machine the netting with suitable capacity is required (e.g. weight XXL 

netting approx 7.5kg)

washing: 

Select the full wash cycle at 40 ° C and max. 1200 rev/ min at spinning. Use a bleach 

free detergent and no fabric softener. 

note:

 The best washing results, we as a manufacturer of ecological have scored toile

-

tries 

w. ULrich gmbh

. Our recommendations: detergent with soapwort extract, lanolin 

wool rinse, stain remover. To buy this products, feel free to contact us. The detergent 

you use just after the dosage instructions on the bottle. As care additive, we recommend 

the addition of 10 ml lanolin wool flushing, to obtain the softness of cotton. If your water 

is very hard, you can use up to 30 ml descaler to reduce the degree of hardness and to 

receive a softer result. In highly polluted netting, you can use stain remover in the salt 

compartment of your washing machine, to improve the cleaning result.

drying: 

The cotton is not suitable for tumble dry using. You can dry the netting  quickly in a 

warm and well-ventilated place. Do not dry out in cloudy weather conditions.The netting 

may only be used again, if it´s thoroughly dry. Through the water, the fine surface fibers 

adhere to each other. To restore the original obtain fluffiness of the deck surface, you 

can use a medium hard clothes brush to treat. A brush made of pure horsehair is best 

for this purpose.

note: 

 The TRAUMSCHWINGER, is designed as relaxing furniture and a furniture is

unsuitable according to a common full laundry.

After drying and brushing 

the cotton hang your 

TRAUMSCHWINGER, 

as it is described in the 

manual.

After washing             

After brushing

Summary of Contents for TRAUMSCHWINGER Babyschwinger

































Reviews: