2. General Information
•The ERIDE30 is equipped with a service indicator in the operating hour counter
display. After switching the key switch on, a four-character code appears for approx. 3
seconds in the display which indicates the software version (e.g. 1.001), possibly
another four-character code which indicates the last fault which has occurred followed
b th
ti
h
t
by the operating hour counter.
•As soon as a fault occurs, the open-ended wrench lights up in the display and the
machine beeps. The current diagnostic code (four-character alphanumeric code in the
service indicator) appears with flashing points between the characters Only when
service indicator) appears with flashing points between the characters. Only when
these criteria are fulfilled is the error currently pending!
•There is no diagnostic code which contains a "ZERO".
6
Summary of Contents for ERIDE 30
