4. Maintenance
Intervals
In a modular structure, the System Maintenance determines the specific technical works to be
executed and equally fixes the period between two maintenance cycles.
q
y
p
y
For each of the maintenances, the replaceable parts are determined as well.
Find further details described in the specific chapters.
System Maintenance K:
To be performed by the customer in accordance with the maintenance and care instructions
To be performed by the customer in accordance with the maintenance and care instructions
contained in the operating instructions (daily or weekly). The driver/operator will be instructed
upon delivery of the machine.
System Maintenance I:
(every 250 hours of operation)
T b
f
d b
lifi d
l f
th i
d
i
t
i
d
ith th
To be performed by qualified personnel of authorized service center in accordance with the
machine-specific system maintenance including spare part kit.
System Maintenance II:
(every 500 hours of operation)
To be performed by qualified personnel of authorized service center in accordance with the
machine-specific system maintenance including spare part kit.
System Maintenance S:
(every 1000 hours of operation, safety check)
To be performed by qualified personnel of authorised service center in accordance with the
machine-specific system maintenance including spare part kit.
Execution of all safety-relevant inspections according to UVV-BGV-TÜV-VDE as prescribed by
law.
20
Summary of Contents for ERIDE 30
