2.2.4 Introduction to Programming
•Press Button 1 to change the active level:
•
Chapter -> Configuration -> Content -> Chapter
Chapter
Configuration
Content
•Press Button 2 to increase the value in the active level.
•After reaching the highest value, pressing again calls in
the lowest value
Chapter
Content
the lowest value.
•Press and hold Button 3 for min. 3 seconds to save the
Content setting selected, as long as the diagnostics
Fig. 2.4
connector is plugged into A1.X3.
•In the parameter tables, "d" always signifies default
setting
setting.
16
Summary of Contents for ERIDE 30
