Minuteman ERIDE 30, Service Manual, Page: 41 / 86

7.1 Mechanical Components
Height adjustment
Th h i ht dj t t i t t 3 t th f t If d it ti l
7.1 Squeegee
The height adjustment is set to 3 mm at the factory. If, despite an optimum angle
adjustment, streaks are produced, the distance between the rollers and floor must be
adjusted by altering the number of washers (Fig. 7.1/6 / Fig. 7.3) on the holder.
In the case of very smooth floors, e.g. coated screed, PVC, linoleum etc., the number
of washers = 2
of washers = 2.
This corresponds to a distance of approx. 2 mm to the floor.
In the case of very uneven floors, e.g. badly laid tiles (puddles form), the number of
washers = 4.
This corresponds to a distance of approx. 4 mm to the floor.
This corresponds to a distance of approx. 4 mm to the floor.
41
Fig. 7.3