2.2.3 Seat Contact Switch
Th
t
t
t
it h i
t d t th
t l l
t
i
A1 t A1 X9 8+18
•The seat contact switch is connected to the control electronics A1 at A1:X9.8+18.
•The control electronics (A1) reacts to the opening of the seat contact switch with a 2-
second delay. This means: if the contact is opened for longer than 2 seconds during
operation the motors stop and the brush head and squeegee are raised
operation, the motors stop and the brush head and squeegee are raised.
•If the switch is closed again within the 2 seconds, the machine continues to operate
without any interruption.
•If an attempt is made to switch the machine on without the seat contact switch being
closed or the switch is open for longer than 2 seconds, all the machine's functions
(driving and clean) are inhibited.
f
f
•If the seat contact switch remains closed for longer than 6 hours without an
interruption, all the machine's functions are deactivated. The service code 3.6.6.4.
appears in the operating hour counter. It is only possible to drive at this point. If the
key switch is switched off and on again without the seat contact switch being opened,
the driving function is deactivated too
the driving function is deactivated too.
11
Summary of Contents for ERIDE 30
