Minuteman ERIDE 30, Service Manual, Page: 5 / 86

1. Information
Attention:
All work on the vehicle may only be completed after disconnection of the power supply
(disconnect the battery plug) with the exception of the current and voltage
t measurements.
When changing high current fuses, only loosen the screws. Never unscrew the screws
completely, otherwise there is a risk of short circuit.
Insert the new high current fuses fully i e evenly under the screws
Insert the new high current fuses fully, i.e. evenly under the screws.
Following repairs, the starting current and operating current must be measured in
order to discover any potential faults.
The legally binding, generally applicable safety and accident prevention regulations
must be observed when performing any work on the vehicles.
5