Minolta Di470 Advanced Information Download

Page: 86 / 364

Initial Steps . . .

3-10

Di470

Feeding Originals of Different Sizes

Feed originals of the different sizes using the automatic document feeder.

Place up to 100 originals (80 g/m

)

in the automatic document feeder.
The side that is to be copied must
be up.

Align the originals in the right rear
corner of the document feeder.

Ensure that the stack of originals
does not exceed the maximum fill
height (see

mark on the

document feeder).

Push the originals tight against the
feed chamber of the document
feeder.

Set the document guide to the
largest original.

Change any other necessary copier settings.

Press the [ORIGINAL] button on the
control panel.

Note the following important information!

Suitable originals for the automatic document feeder are:

Type of originals:

• Single sheets of smooth standard paper
• 1-sided originals

50 to 110 g/m

• 2-sided originals

60 to 90 g/m

• with mixed original detection

60 to 90 g/m

Original size:

• 1/2-sided originals

A3 L to A5 L

• with mixed original detection

A3 L to A4

Without Finisher

With Finisher

Original

Summary of Contents for Di470













































































































































































































































































































































































Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands

Minolta Di470, Advanced Information

Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands