Minolta Di470 Advanced Information Download Page 26

Page: 26 / 364

Getting to Know Your Copier

2-8

Di470

Finisher FN-5

The finisher enables controlled finishing and stacking of copies. Use the
finisher to sort, group, punch, staple and even fold copies.

CAUTION

Damage to the device by improperly estimating the space required

The bottom offset tray of a finisher moves downward during copying.
Objects below the tray may seriously damage it.

Do not place any objects below the exit tray of a finisher.

Item

Name

Description

Front Door

Open the front door to change the stapler unit
or clear a paper jam.

Bottom Offset Tray

The sorted, stapled or grouped copies sets are
received here.

Staple Tray

Open this tray to load paper manually for
stapling or to or clear a paper jam.

Top Offset Tray

Receives copies made on standard or heavier
paper.

Recessed Grip

Use the recessed grip to pull the finisher away
from the copier.

Summary of Contents for Di470













































































































































































































































































































































































Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands

Minolta Di470, Advanced Information

Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands