Minolta Di470 Advanced Information Download Page 42

Page: 42 / 364

Getting to Know Your Copier

2-24

Di470

Space Requirements for the Copier

Be sure to allow a clearance of 150 mm or more behind the copier. This
will ensure good ventilation.

This information is applicable to the basic unit, including EDH-3, PF-115,
FN-5 and C-306L.

Storing Supplies

Ensure that supplies are stored:

In their sealed original packaging materials

Protected from direct sunlight and heat sources

In a cool, dry, dust-free location

Out of the reach of children

WARNING

Toner can be hazardous to your health!

Toner is harmful if swallowed.

If you get any toner on your hands, immediately wash them
thoroughly with soap and cold water.

Scale: mm

Front view

Side view

032

171

155

515

407

664

240

1031

2102

2857

770

471

1241

Summary of Contents for Di470













































































































































































































































































































































































Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands

Minolta Di470, Advanced Information

Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands