Minolta Di470 Advanced Information Download Page 74

Page: 74 / 364

Getting to Know Your Copier

2-56

Di470

Position a new staple cartridge.
Carefully remove the seal from the
staples.

Position the staple cartridge into
the staple unit.

The staple cartridge locks into
place with an audible click.

Align the arrows on the stapler unit
to those on the finisher. Position the
staple unit back in the holder bay.

Push and hold the button. While
holding it, turn it clockwise to close
the cover of the stapler unit.

The touch screen now displays a
prompt to run a test staple cycle.

Summary of Contents for Di470













































































































































































































































































































































































Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands

Minolta Di470, Advanced Information

Search results

Summary of Contents for Di470

Reviews:

Related manuals for Di470

Brands by name

Popular brands