Minolta Di 152f User Manual Download Page 279

Page: 279 / 333

Error Messages

12-2

Di152f/Di183f

Press down on the Paper-Lifting
Plate until it locks into place.

Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.

Have the necessary precautions
been observed when loading
the paper?

➜

Do not load so many much
paper that the top of the stack is
higher than the

mark.

Slide the paper guides against the
edges of the paper.

Is the paper guide positioned
correctly?

➜

Make sure that the paper guides
are pushed up against the
edges of the paper.

Close the paper tray.

Paper-Lifting Plate

Summary of Contents for Di 152f














































































































































































































































































































































Search results

Summary of Contents for Di 152f

Reviews:

Related manuals for Di 152f

Brands by name

Popular brands

Minolta Di 152f, User Manual

Search results

Summary of Contents for Di 152f

Reviews:

Related manuals for Di 152f

Brands by name

Popular brands