Minolta Di 152f User Manual Download Page 64

Page: 64 / 333

Before Making Copies or Faxing

Di152f/Di183f

3-27

To enter an access number

Using the 10-Key Pad, enter the 3-
digit account (section) access
number.

❍

If you wish to correct the entered
access number, press the [No]
key, and then enter the correct number.

Press the [Access] key.

The main screen of the initial mode appears and copying can be
started. Select the desired settings.

When you are finished making copies, press the [Access] key.

Printing From the Computer

If the optional Printer Controller is installed, the machine can be used as
a printer.

For operating instructions, refer to the User Manual enclosed with the
Printer Controller.

Scanning From the Computer

If the enclosed TWAIN Driver is installed, the machine can be used as a
scanner for a computer.

For operating instructions, refer to the instruction manual enclosed with
the TWAIN Driver.

Summary of Contents for Di 152f














































































































































































































































































































































Search results

Summary of Contents for Di 152f

Reviews:

Related manuals for Di 152f

Brands by name

Popular brands

Minolta Di 152f, User Manual

Search results

Summary of Contents for Di 152f

Reviews:

Related manuals for Di 152f

Brands by name

Popular brands