manualshive.com logo in svg

MINOLTA-QMS MAGICOLOR 2210, User Manual

Share
Download
MINOLTA-QMS MAGICOLOR 2210 User Manual Download Page 88

Status, Error, and Service Messages

86

<

X> TONER LOW

The 

<

X>

 (color) toner cartridge 

is low. There is still enough for 
approximately 100 letter/A4 
pages (at 5% coverage) before 
the printer stops.

Redistribute the 
toner in the car-
tridge, or replace 
the cartridge.

ACC ALREADY 

DISABLED 

The accounting option 
selected is now in effect.

No action needed.

ACC ALREADY 

ENABLED 

ACC DISABLED

ACC ENABLED

ACC FILE 95% 

FULL

ACC FILE 90% 

FULL

ACC FILE 85% 

FULL

ACC FILE 80% 

FULL

The Job Accounting File is 80, 
85, 90, or 95% full.

If you want 
accounting 
enabled, copy the 
job accounting and 
paper accounting 
files to floppy 
disk(s), or transfer 
them to your host 
computer using ftp 
(if available). Then 
reset the account-
ing files so that 
new jobs can be 
accepted. If you 
don’t want to use 
accounting, you 
can disable it.

ACC FILES GOT 

REMOVED

The accounting option is 
disabled and the accounting 
files are empty. After a reset, 
the files are removed. This 
prevents you from wasting disk 
space with empty accounting 
files.

No action needed.

This message...

means...

Do this...

Summary of Contents for MAGICOLOR 2210

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands