manualshive.com logo in svg

MINOLTA-QMS MAGICOLOR 2210, User Manual

Share
Download
MINOLTA-QMS MAGICOLOR 2210 User Manual Download Page 75

Solving Other Problems 

73

You are 
experienc-
ing prob-
lems 
duplexing.

Media or settings 
are not correct.

Make sure that you are using only plain 
paper. Do not duplex envelopes, glossy 
stock, labels, postcards, transfer media, 
or transparencies. Make sure that you 
have not mixed media types in your 
multipurpose tray.

Make sure that your document has 
more than one page.

Go into the printer’s control panel and 
make sure that duplex is an available 
option.

In the printer driver, choose Short Edge 
(flipped as on a clipboard) or Long Edge 
(flipped as in a loose-leaf notebook). 
Make sure that you are using correct 
media.

Make sure that all of the covers are 
closed. Open and then close the covers 
to confirm that they are securely closed.

If you turned the printer off, make sure 
that you have turned the printer on 
again and waited for it to warm up

Transfer 
belt can-
not be 
removed.

The OPC drum unit 
is installed.

Remove the OPC drum unit first, then 
remove the transfer belt. 

The transfer belt 
left release lever is 
not set in the trans-
fer belt removal 
position.

Turn the transfer belt left release lever 
clockwise to the 4 o’clock position, then 
remove the transfer belt. 

The 
printer 
pauses.

The printer pauses 
for the Auto-Image 
Density Control 
(AIDC) cycle.

After 100 1-sided pages of a continuous 
print r

un, th

e magicolor 2210 automati-

cally pauses to do an AIDC cycle. This 
process is provided to make sure 
reliable printer operation with optimum 
output quality.

Symptom

Cause

Solution

Summary of Contents for MAGICOLOR 2210

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands