manualshive.com logo in svg

MINOLTA-QMS MAGICOLOR 2210, User Manual

Share
Download
MINOLTA-QMS MAGICOLOR 2210 User Manual Download Page 78

Solving Problems with Printing Quality

76

Irregular 
print or 
mottled 
image 
appears.

The media is moist from 
humidity.

Remove the moist media and replace it 
with new, dry
media. 

There is 
insuffi-
cient 
fusing or 
the 
image 
comes off 
when 
rubbed.

The media is moist from 
humidity.

Remove the moist media and replace it 
with new, dry media. 

Media with specifications 
not covered by the printer 
warranty is being used.

Use media that is covered by the printer 
warranty. 

Your media type may be 
incorrectly set.

Envelopes, glossy stock, labels, trans-
fer media, and thick stock have to be 
set in the Thick Stock mode.

The print 
or color 
density 
may be 
uneven.

One or more of the toner 
cartridges may be near 
empty or damaged.

Remove the toner cartridges and gently 
rock them five or six times to redistrib-
ute the toner. Then, reinstall the car-
tridges.

Install new toner cartridges.

The OPC drum may have 
misinstalled or defective.

Reinstall the OPC drum cartridge. If 
necessary, replace the entire drum kit. 

Symptom

Cause

Solution

Summary of Contents for MAGICOLOR 2210

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands