MINOLTA-QMS MAGICOLOR 2210, User Manual

Page: 50 / 176

Maintaining the Printer 48
Maintaining the Printer
Handle the printer with care to preserve its life. Abuse may cause damage
and void your warranty. If dust and paper scraps remain on the inside or out-
side of the printer, printer performance and print quality will suffer, so the
printer should be cleaned periodically. Keep the following guidelines in mind:
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning. Do not spill water or detergent into the printer;
otherwise the printer will be damaged and an electric shock may occur.
ACHTUNG! Ziehen Sie den Netzstecker aus der Steckdose bevor Sie
den Drucker reinigen. Verschütten Sie kein Wasser oder andere
Flüssigkeiten auf dem Drucker, da das Gerät sonst beschädigt wird
oder die Gefahr eines elektrischen Schlages besteht.
If you have an optional 5-bin mailbox installed, turn the printer off first,
then turn off the mailbox.
„
Either clean the printer before use, or allow time after unplugging it to
allow the fuser unit to cool down.
Attention
The fuser unit is hot. When the top cover is opened,
the fuser unit temperature drops gradually (one hour
wait time).
„
Be careful when cleaning the inside or removing paper jams, as the fuser
unit and other internal parts may become very hot.
„
Do not place anything on the top of the printer.
„
Use a soft cloth to clean the printer.
„
Never spray cleaning solution directly on the printer’s surface; the spray
could penetrate through the air vents of the printer and damage the inter-
nal circuits. Avoid using abrasive or corrosive solutions or solutions that
contain solvents, (such as alcohol and benzene) to clean the printer.
„
Always test any cleaning solution (such as mild detergent) on a small area
of your printer to check the solution's performance.
„
Never use sharp or rough implements, such as wire or plastic
cleaning pads.
„
Always close the printer covers gently. Never expose the printer
to vibrations.