manualshive.com logo in svg

MINOLTA-QMS MAGICOLOR 2210, User Manual

Share
Download
MINOLTA-QMS MAGICOLOR 2210 User Manual Download Page 12

Replacing Toner Cartridges

10

Toner Cartridge Replacement

1

Check the message display to see what toner color is out.

2

Open the printer’s front cover. 

Attention

Be careful not to spill toner on the inside of the printer’s front cover. 
Toner will fall from there into the upper media tray. If toner does fall 
onto the open cover, immediately wipe it with a dry, lint-free soft 
cotton cloth or swabs.

If the toner cartridge you want to replace is the one showing, go to step 5. 
If not, go to step 3.

3

Press  the toner cartridge 
carrousel button 

c

and 

release the button 

d

before 

turning the carrousel dial 

e

counterclockwise until it 

stops.

The carrousel rotates 90° 
and stops.

The toner cartridge carrou-
sel may start to turn auto-
matically from the weight of 
the inserted toner cartridge. 
Make sure you have fully 
turned to the next slot before 
trying to insert another toner cartridge.

4

Repeat step 3 until the color to be replaced is visible.

5

Pull the release lever to eject and 
remove the toner cartridge you 
are going to replace.

1

3

2

Summary of Contents for MAGICOLOR 2210

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands