![background image](http://html1.mh-extra.com/html/minn-kota/terrova-copilot/terrova-copilot_owners-manual_1802760008.webp)
8 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
i. With the Right Sideplate laying flat, and the CoPilot
Receiver that was just installed facing upwards,
route the yellow wire Antenna through the pegs and
grooves on the Right Sideplate. Follow the grooves
in each of the pegs.
j. Route the Power Connection through the bottom
groove in the Right Sideplate.
e. With the CoPilot Cover removed, take the CoPilot
Receiver (Item #B) and position it in the space
below where the CoPilot Cover was attached.
f. Position the CoPilot Receiver so that the Learn
Button is positioned towards the upper left of
the sideplate. The Antenna and CoPilot Power
Connection should sit to the right and exit the
board from the surface that sits towards the Right
Sideplate. The Mounting Hole in the CoPilot Receiver
should sit on the left Screw Peg on the sideplate.
g. Check the placement of the CoPilot Receiver by
making sure that the Learn Button is visible when
the Right Sideplate is turned over.
h. Using the #6-20 X 3/8’’ Screw (Item #4) provided,
insert the Screw through the receiver and into the
Right Sideplate. Be sure that the wires are not
pinched in the Screw Pegs when tightening the Screw
using a #1 Phillips Screwdriver. Do not over tighten.
ITEM(S) NEEDED
#4 x 1
#B x 1
CoPilot Receiver
CoPilot Receiver
CoPilot
CoPilot
Receiver
Receiver
CoPilot Receiver
CoPilot Receiver
Power Connection
Power Connection
Power
Power
Connection
Connection
Power Connection
Power Connection
Antenna
Antenna
Antenna
Antenna
Antenna
Antenna
Learn Button
Learn Button
Screw
Screw
Screw
Screw
Right
Right
Sideplate
Sideplate
Mounting Hole
Mounting Hole
NOTICE:
Do not over tighten the Screw that holds
the CoPilot Receiver in place.
Right Sideplate
Right Sideplate
Right Sideplate
Right Sideplate
Screw Peg
Screw Peg
4
5
4e
4g
4h