![background image](http://html1.mh-extra.com/html/minn-kota/terrova-copilot/terrova-copilot_owners-manual_1802760011.webp)
minnkotamotors.com | 11
©2019 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
d. Turn the Right Sideplate over.
e. Take the CoPilot Receiver (Item #B) and position it
so that the Learn button is towards the bottom right
of the sideplate.
f. The Antenna and CoPilot Power Connection should
sit to the left and exit the board from the surface
that sits towards the Right Sideplate. The CoPilot
Received should sit towards the right Screw Peg on
the Side Plate.
g. Check the placement of the CoPilot Receiver by
making sure that the Learn Button is visible when
the Right Sideplate is turned over.
h. Using the #6-20 X 3/8’’ Screw (Item #4) provided,
insert the screw through the Mounting Hole in the
CoPilot Receiver and into the Screw Peg on the
Right Sideplate. Be sure that the wires are not
pinched in the Screw Peg when tightening the Screw
using a #1 Phillips Screwdriver. Do not over tighten.
ITEM(S) NEEDED
ITEM(S) NEEDED
#4 x 1
#B x 1
CoPilot Receiver
CoPilot Receiver
CoPilot Receiver
CoPilot Receiver
Screws
Screws
Power Connection
Power Connection
Right
Right
Sideplate
Sideplate
Mounting Hole
Mounting Hole
Antenna
Antenna
Right Sideplate
Right Sideplate
NOTICE:
Do not over tighten the Screw that holds
the CoPilot Receiver in place.
Power Connection
Power Connection
Antenna
Antenna
Learn Button
Learn Button
Right Sideplate
Right Sideplate
3
4
4g
4h