PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
16
Figure 3. Single-ended RCA connection
Figure 4. Connecting a balanced source to the C-DSP 8x12 DL.
3
H
ARDWARE
C
ONNECTIVITY
Connections to the C-DSP 8x12 DL are made on the front and rear panels.
3.1
A
NALOG INPUTS
3.1.1
Low-level inputs
Low-level analog connections are made directly to the RCA jacks on the front panel. Be sure to take careful note
of the channel numbering shown in this diagram and on the front panel. These inputs accept a maximum input
voltage of either 2 or 4 VRMS, depending on the input sensitivity switch setting (see page 71).
Note that these are fully differential inputs. A regular RCA-RCA cable be used to connect from equipment with
single-ended outputs, as shown in Figure 3.
I
f connecting to equipment with balanced output, connect the negative or “cold” leg to the RCA
shield and the
positive or “hot” leg to the RCA tip
, as shown in Figure 4.
