PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
39
5.5
C
ONFIGURING FOR MEASUREMENT
The
Dirac Live Calibration Tool for miniDSP (DLCT)
user interface is shown in this annotated screenshot.
Logo and status progress bar
This area shows a progress bar with current status when the program is performing calculations. If the
program seems unresponsive at any time, check the status here.
Screen selection tabs
Each tab selects a different step of the calibration process. These are generally worked through in order,
from top to bottom. This section covers the first four tabs; the final two are covered in
Dirac Live Filter
Design
.
Load and save a project
A set of measurements can be saved to a file and reloaded at a later time. See
Saving and loading projects
.
Back / Next
Use these two buttons to advance to the next tab when each is complete, or to go back to the previous
tab to make alterations. The tabs at the left can also be clicked on directly.
Help open/close
Click on the small Help divider at the right of the screen to open a pane with help on the currently
selected tab. Click on the divider again to close the help pane.
