PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
53
6.4
L
OADING FILTER SETS
The
Export
tab initially shows four empty “slots” for filter sets (a filter set is one filter for every channel). Filter
sets are managed with a “drag and drop” metaphor:
•
To load the most recently generated filter set into the processor, drag the box at the top left (in this example
labeled “
4.1 1 January 2019
”) and drop it onto an empty slot.
•
To remove a filter set, click on its name (oriented vertically), drag it from the slot and drop it on the trashcan
icon at the top right.
You must load the filters into the same slot as the preset selected when running the Dirac Live
calibration measurements.
To load a filter set into a slot that already has filters loaded, first delete the loaded filter set by
dragging it onto the trashcan icon, then drag and drop the current filter set onto the now-empty slot.
The two main controls on this tab are:
Filter
Turn this on to enable the Dirac Live® correction filters.
Output volume
Move the slider to adjust the master volume of the processor. Output volume can be also be adjusted
by the front panel control knob or an infrared remote control.
