PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
12
1.3
O
VERVIEW OF CONFIGURATION STEPS
The steps for configuring the C-DSP 8x12 DL with Dirac Live® are summarized as follows:
1.
Connect the
C-DSP 8X12 DL
audio processor into your system and
install software. See Section 2, Hardware Connectivity and Section 3,
Software Installation.
2.
Configure output channel processing with the C-DSP 8x12 DL plugin.
This sets up individual control of each output channel in order to
implement (for example) subwoofer crossover, active speaker
crossovers, or rear/center synthesis. See Section 4, Plugin
Overview.
3.
Run a series of acoustic measurements using the
Dirac Live
Calibration Tool
program, to capture the acoustic behavior of your
speakers and acoustic environment. See Section 5, Acoustic
Measurement for Dirac Live.
4.
Generate digital correction filters that will be executed by the C-DSP
8x12 DL. Up to four filter sets can be downloaded into the processor
for easy real-time recall and auditioning. See Section 6, Dirac Live
Filter Design.
5.
Once configuration is complete, the computer is not needed. See
Section 7, Remote Control.
