PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
40
5.5.1
Sound System tab
On the
Sound System
tab, set the following parameters.
Choose system configuration
Use the dropdown menu to select your system configuration.
In a vehicle environment, the
Custom System
configuration is usually the best choice. When this is
selected, an additional parameter appears as shown above:
Number of channels
. However, there are a
range of possible scenarios; here are some common ones:
o
For a stereo source and two speaker channels, select Stereo Speaker System. Do the same if you
want to generate a subwoofer drive signal from the left and right input channels.
o
For a “straight through”
multichannel configuration, use Custom System and set Number of
Channels to the number of input channels. For example:
▪
Use
4
for a four-channel source and four speakers, or for a four-channel source with 4
speakers and a subwoofer.
▪
Use
5
for a 4.1 source and 4 speakers plus a sub.
o
For a 5.1 source that applies the “10 dB LFE gain,” use 5.1 Speaker System.
Test signal playback device
Preset to
C-DSP 8x12 DL
. This will ensure that test signals are sent into your audio system via the
C-DSP
8x12 DL
processor.
If the entry for
C-DSP 8x12 DL
is not showing, check that your
C-DSP 8x12 DL
processor is connected
via USB and powered on, click the
Rescan
button, and then use the drop-down menu to select
C-DSP
8x12 DL
.
Once you have verified that this tab is correct, click the
Proceed
button.
