Miniature Aircraft USA X-Cell Whiplash Turbine Manual Download

Page: 38 / 38

Warranty

The warranty covers defects in material, workmanship, or missing components to the original purchaser for

30 days from the date of purchase. Miniature Aircraft will replace or repair, at our discretion, the defective or

missing component. Defective components MUST BE returned to us prior to replacement.

Any part which has been improperly installed, abused, crashed, or altered by unauthorized agencies, is not

covered. Under no circumstances will the buyer be entitled to consequential or incidental damages. The

components used in this kit are made from special materials designed for special applications and design

strengths. We recommend that all replacement parts be original parts manufactured by Miniature Aircraft to

ensure proper and safe operation of your model. Any part used which was manufactured by any firm other

than Miniature Aircraft VOIDS all warranties of this product by Miniature Aircraft.

For updates to this manual, or any other Miniature Aircraft manual,

go to www.miniatureaircraft.de.

Summary of Contents for X-Cell Whiplash Turbine







































Search results

Summary of Contents for X-Cell Whiplash Turbine

Reviews:

Related manuals for X-Cell Whiplash Turbine

Brands by name

Popular brands

Miniature Aircraft USA X-Cell Whiplash Turbine, Manual

Search results

Summary of Contents for X-Cell Whiplash Turbine

Reviews:

Related manuals for X-Cell Whiplash Turbine

Brands by name

Popular brands