Minebea MPC-201-25, Instruction Manual, Page: 57 / 124

39
8-10.
Status Display 1
Indicates the current software status.
Display Description
Measuring
Indicates that the module interface is connected and measurement is underway.
Waiting Indicates that the module interface is connected and measurement is not currently
underway.
Off-line Indicates that the module interface is not connected.
*To connect the interface while off-line, connect the module to the PC and restart the
software.
8-11.
Status Display 2
(1) Available storage space Displays the drive free space (available storage space).
The disk displayed is the drive specified as the [Data save
destination].
The available storage space (free disk capacity) display changes
at preset thresholds depending on the percentage of free space.
Free space Display
50% ~ 100% (OK)
30% ~ 50% (Low)
30% or less (Minimal: Save stopped)
Data should be exported regularly to avoid the (Low) indication.
Data cannot be saved if the available space falls (Minimal: Save
stopped).
(2) Measurement mode Indicates the measurement mode currently selected.
(3) Template filename Indicates the filename of the template currently displayed.
(4) Set conditions filename Indicates the set conditions filename currently set.
(5) Current date Indicates the current time and date.
The available storage space display thresholds can be altered as desired. See Section 12 (4) "Free
drive space threshold values".
(1) (2) (4) (3)
(5)